Catatanw

October 8, 2009

Sierra USB Modem 885U+m2 openSUSE 11.1

Filed under: 1,Linux,Tips n' Trik — catatanpinguin @ 08:21

next dari postingan sebelumnya, setelah install openSUSE langsung cari cara gimana si modem sierra 885u bisa dijalanin, cara pertama adalah mencari tau apakah si driver sierra sudah dikenali oleh kernel apa belum pakek perintah berikut

#dmesg

jika hasil dari perintah diatas ada tulisan seperti dibawah ini, itu berarti modem sierra sudah bisa dikenali oleh kernel

usbserial: USB Serial Driver core
usbserial: USB Serial support registered for Sierra USB modem
sierra 1-2:1.0: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB0
sierra 1-2:1.1: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB1
sierra 1-2:1.2: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB2
sierra 1-2:1.3: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB3
sierra 1-2:1.4: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB4
sierra 1-2:1.5: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB5
sierra 1-2:1.6: Sierra USB modem converter detected
usb 1-2: Sierra USB modem converter now attached to ttyUSB6
usbcore: registered new interface driver sierra
sierra: USB Driver for Sierra Wireless USB modems: v.1.3.2

jika modem sudah dikenali oleh kernel, tinggal pasang wvdial tapi tenang saja di openSUSE sudah disediain wvdial tinggal dikonfigurasi sajah, lakukan perintah berikut, untuk memanggil konfigurasi default dari wvdial

#wvdialconf

setelah itu buka file wvdial.conf

#vim /etc/wvdial.conf

kemudian tinggal sesuain aja dengan konfigurasi provider yang digunakan, karena sayah pakek m2, berikut konfigurasi wvdial yang saya gunakan

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”indosatm2″
Modem = /dev/ttyUSB3
Phone = *99#
Idle Seconds = 0
Password = <masukan password>
Modem Type = Analog Modem
Stupid Mode = 1
Compuserve = 0
Baud = 3600000
Auto DNS = 1
Dial Command = ATDT
Ask Password = 0
ISDN = 0
Username = <masukan username>

setelah konfigurasi di sesuaikan, tinggal panggil wvdial nya untuk bisa koneksi ke internet, dengan perintah berikut

#wvdial

tapi….tapi…ohhh tidak masih belum bisa konek juga hohoho, tenang itu bukan masalah besar brooo…

jika saat memanggil wvdial untuk melakukan koneksi, terdapat pesan error seperti dibawah ini

–> local IP address 114.59.129.176
–> pppd: п
–> remote IP address 10.64.64.64
–> pppd: п
–> Script /etc/ppp/ip-up run successful
–> Default route Ok.
–> warning, no nameserver found `/etc/resolv.conf`
–> Nameserver (DNS) failure, the connection may not work.
–> Connected… Press Ctrl-C to disconnect
–> pppd: п

kite bisa mengakali masalah diatas dengan memasukan DNS server secara manual di file resolv.conf, caranya :

buka file resolv.conf di /etc/resolv.conf

#vim /etc/resolv.conf

setelah itu masukan DNS server provider yang digunakan, karena saya menggunakan provider m2 maka saya masukan DNS server indosatm2

nameserver 202.155.0.10
nameserver 202.155.0.15

setelah itu panggil kembali wvdial, dan huuuhhuuuyyyy bisa konek….

cara ini saya dapat dari blog nya mas yang cakep ini, yang masih jadi pertanyaan saya adalah apakah bisa jika menggunakan opsi Automatic DNS sehingga tidak perlu memasukan DNS server provider ke file resolv.conf??

Jika sudah konek ke internet……

Selamat meng apdet openSUSE anda….

11 Comments »

  1. pakai m2 di huawei e156G, bisa Auto koq..😀

    Comment by zahris — October 8, 2009 @ 08:34 | Reply

  2. eh bos, bisa dipake di slackware ga?

    Comment by itachi — October 17, 2009 @ 09:48 | Reply

    • apane yang mau dipakek di slackware?

      Comment by catatanpinguin — October 18, 2009 @ 10:47 | Reply

  3. mas cara mengatahui modem kita ada di usb mana ?itu ghmana cuz tag isi modem: dev/ttyusb3 kok gag bisa

    Comment by bim — November 20, 2009 @ 15:11 | Reply

    • @bim : coba liat pakek perintah ini mas $dmesg
      semoga membantu…

      Comment by catatanpinguin — November 20, 2009 @ 18:34 | Reply

  4. Mas saya mau tanya dunk. saya dah set seperti yg mas berikan. tetapi ga bisa terkoneksi. Pesan errornya kurang lebih gs bisa mengenali serial port yg digunakan. Ini hasil dari command dmesg-nya :

    [ 10.052984] sierra 1-4:1.0: Sierra USB modem converter detected
    [ 10.060254] sierra 1-4:1.1: Sierra USB modem converter detected
    [ 10.066700] sierra 1-4:1.2: Sierra USB modem converter detected
    [ 10.072698] sierra 1-4:1.3: Sierra USB modem converter detected
    [ 10.079576] sierra 1-4:1.4: Sierra USB modem converter detected
    [ 10.089328] sierra 1-4:1.5: Sierra USB modem converter detected
    [ 10.093823] sierra 1-4:1.6: Sierra USB modem converter detected
    [ 10.099459] usbcore: registered new interface driver sierra
    [ 10.099462] sierra: v.1.3.7:USB Driver for Sierra Wireless USB modems
    [ 2018.675766] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.675881] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676007] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676132] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676257] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676383] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676509] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2018.676633] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.554780] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.554889] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555016] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555139] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555266] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555388] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555513] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2025.555639] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.396902] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397015] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397139] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397263] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397389] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397512] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397637] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2037.397762] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445152] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445256] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445380] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445505] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445630] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445755] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.445879] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2064.446004] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385156] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385265] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385391] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385516] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385639] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385763] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.385888] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2071.386015] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.593767] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.593883] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594007] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594132] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594257] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594382] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594507] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2136.594632] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405152] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405266] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405395] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405515] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405638] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405768] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.405888] sierra ttyUSB4: resubmit read urb failed.(-1)
    [ 2143.406013] sierra ttyUSB4: resubmit read urb failed.(-1)

    kayanya usb masih blm bisa dikenali. Mungkin ada setting yg lainnya yg luput saya kerjakan?? terima kasih sebelum & seduahnya.

    Comment by bowo — December 15, 2009 @ 10:54 | Reply

    • @ Bowo : wah…klo ditempat saya colok langsung terdeteksi tuch mas,coba mungkin lepas trus colokin lagi gimana hasilnya maaf klo tidak menjawab,klo mank belum bisa nanti mungkin saya sharing ke temen2 komunitas yang lain…

      Comment by catatanpinguin — December 15, 2009 @ 17:09 | Reply

  5. tararengkiyu ah

    dah jalan….:)

    Comment by Tnn — February 8, 2010 @ 22:05 | Reply

    • yuuukk aaahhh mariii…:-D

      Comment by catatanpinguin — February 9, 2010 @ 09:54 | Reply

  6. […] Sierra USB Modem 885U+m2 openSUSE 11.1 […]

    Pingback by openSUSE & Akses Internet 3G/HSDPA (IM2, Telkomsel) | Komunitas openSUSE Indonesia — April 13, 2010 @ 05:42 | Reply

  7. bang itu konfigurasinya bisa dipake diblankon g?

    Comment by zeivassa — December 22, 2010 @ 22:03 | Reply


RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Blog at WordPress.com.

%d bloggers like this: